In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct677...

In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Only report alarms if driver is ready Userspace can read sysfs attributes before driver registration is complete, immediately after devm_hwmon_device_register_with_info() has been called. At that time, data->hwmon_dev is not yet initialized. This can trigger a NULL pointer access since lm90_update_device() and with it lm90_update_alarms_locked() will be called. This call schedules report_work and lm90_report_alarms(), which passes the still-NULL data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer dereference. Fix the problem by only scheduling the report and alert workers data->hwmon_dev is set.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) DMA-align output buffer Sashiko reports: When send_output_report() calls hid_hw_output_report(), the underlying USB HID core calls usb_interrupt_msg() which maps this buffer directly for DMA. When the DMA mapping flushes or invalidates the cacheline, it will corrupt the adjacent variables (mutex, update_interval) that were modified concurrently by the CPU. This causes memory corruption due to cacheline sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings for this violation. Any operation that triggers send_output_report() (like setting a fan speed or updating the interval) causes the USB DMA mapping. On systems with non-coherent caches, this structural bug causes immediate and deterministic memory corruption. Align the output buffer to ARCH_DMA_MINALIGN to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: net: do not send ICMP/NDISC Redirects when peer allocation fails When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry under memory pressure or tree size caps, redirect handlers previously fell back to sending un-rate-limited ICMP/NDISC Redirect messages. In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL. In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into inet_peer_xrlim_allow(), which returned true when peer == NULL. Because ICMP/NDISC Redirects are not part of the default global rate limit mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates an un-rate-limited ICMP packet storm. Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and ndisc_send_redirect() when peer is NULL.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Prevent access to unsupported weight registers Sashiko reports: During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements. In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read elements at index 3 and 4 from these 3-element arrays. This results in a global out-of-bounds read, which can be caught by KASAN. Furthermore, the driver uses these garbage out-of-bounds values as hardware register addresses for subsequent read and write operations. This leads to invalid hardware register access, potentially causing hardware misconfigura...

In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev().

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once.

In the Linux kernel, the following vulnerability has been resolved: rtase: fix double free of multi-frag skb on DMA map failure In rtase_start_xmit(), when the head buffer DMA mapping fails after rtase_xmit_frags() has mapped all fragments, the error path clears the fragment descriptors with rtase_tx_clear_range(), which frees the skb through the last-frag slot and accounts tx_dropped. Control then falls through to the common error label, which frees the same skb a second time and counts it again. Return right after clearing the fragments when the skb owns frags; the no-frag case still drops through and frees the head skb once.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exponent 32 is too large for 32-bit type int Fix this by rejecting offshift >= 16 during filter creation in u32_change().

In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked permanently. Fix this by removing the early return. Instead, synchronously cancel any pending work with cancel_delayed_work_sync() before freeing @utn. To be able to call cancel_delayed_work_sync() while holding RTNL (the work also needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock...

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: clear iso_data always when detaching conn from hcon When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is necessary, otherwise later iso_conn_free() will UAF. Fix clearing of iso_data in iso_sock_disconn() Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on iso_sock_release() followed by hci_abort_conn_sync().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp l2cap_le_connect_rsp() obtains a channel via __l2cap_get_chan_by_ident() but neither holds a reference nor uses l2cap_chan_hold_unless_zero() before locking and operating on it. A concurrent l2cap_chan_del() triggered by a remote disconnect can free the channel between the lookup and l2cap_chan_lock(), causing a use-after-free. The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero() to safely hold a reference, but l2cap_le_connect_rsp() was left unprotected. Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup and l2cap_chan_put() on the exit path, consistent with other L2CAP response handlers.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_sock_getname Accessing iso_pi(sk)->conn requires lock_sock, which is not held here. Fix by adding the lock/release.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_connect_ind Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the "ev3" part of iso_connect_ind. It may also be NULL if socket has transitioned away from the LISTEN/CONNECT states before locking. Fix by adding lock/release. Recheck hcon is valid after lock acquire where needed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: hold sk properly in iso_conn_ready sk deref in iso_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk is currently accessed without either: [Task 1] [Task 2] iso_sock_release iso_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) iso_sock_kill(sk) UAF on sk deref Fix possible UAF by holding sk refcount in iso_conn_ready(). Also recheck after lock_sock that the socket is still valid. Adjust locking so conn->sk is cleared only under lock_sock.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix leaking sk after socket release iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket || sock_flag(sk, SOCK_DEAD) for early return, but this is always true since sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket always leaks, iso_sock_destruct is never called. The socket reference also leaks when __iso_sock_close() does not set SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after zapping. Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for something else, and lock_sock to ensure iso_sock_kill() puts sk only after socket release only once. Release and iso_conn_del may run concurrently. Call iso_sock_kill() from iso_conn_del() to clean sk up after zapping. Remove call to iso_sock_kill() from iso_sock_close(), as it's generally no-op there.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid deadlocks in iso_sock_timeout iso_sock_timeout() takes lock_sock, so sync disabling the timer while holding that lock may deadlock. iso_sock_timeout() may also run concurrently with iso_conn_del(), which leads to UAF [Task 1] [Task hdev->workqueue] iso_sock_timeout iso_conn_del iso_conn_hold_unless_zero iso_chan_del `------------> iso_conn_put caller frees hcon iso_conn_put iso_conn_free conn->hcon->iso_data = NULL; /* UAF */ Fix the deadlock by removing the disable from the lock_sock sections. Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn which may need to be freed in lock_sock section. Convert some of the clear_timer to disable_timer.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix refcounting of iso_conn iso_conn_del() and iso_chan_del() have a race that results to double-put of iso_conn: [Task hdev->workqueue] [Task 2] iso_conn_del iso_chan_del iso_conn_hold_unless_zero iso_conn_lock iso_conn_lock conn->sk = NULL iso_conn_unlock sk = iso_sock_hold(conn) <---------´ if (!sk) iso_conn_put iso_conn_put iso_conn_put /* UAF */ The extra put for !sk in iso_conn_del() is currently required since failing iso_chan_add() may leave iso_conn not associated with any sk. Fix by having iso_pi(sk)->conn own refcount when non-NULL, so iso_conn_del does not need to put it. Adjust the iso_conn_add() refcounting so that conn is put if it does not get associated with an sk.