In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del() l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer and id_addr_timer while holding conn->lock. However, the work functions l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire conn->lock, creating a potential AB-BA deadlock if the work is already executing when l2cap_conn_del() takes the lock. Move the work cancellations before acquiring conn->lock and use disable_delayed_work_sync() to additionally prevent the works from being rearmed after cancellation, consistent with the pattern used in hci_conn_del().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED state to support L2CAP reconfiguration (e.g. MTU changes). However, since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from the initial configuration, the reconfiguration path falls through to l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and retrans_list without freeing the previous allocations and sets chan->sdu to NULL without freeing the existing skb. This leaks all previously allocated ERTM resources. Additionally, l2cap_parse_conf_req() does not validate the minimum value of remote_mps derived from the RFC max_pdu_size option. A zero value propagates to l2cap_segment_sdu() where pdu_len becomes zero, causing the while loop to never terminate since len is never decremented, exhausting all available memory. Fix the double-init by skipping l2cap_ert...

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: clamp SCO altsetting table indices btusb_work() maps the number of active SCO links to USB alternate settings through a three-entry lookup table when CVSD traffic uses transparent voice settings. The lookup currently indexes alts[] with data->sco_num - 1 without first constraining sco_num to the number of available table entries. While the table only defines alternate settings for up to three SCO links, data->sco_num comes from hci_conn_num() and is used directly. Cap the lookup to the last table entry before indexing it so the driver keeps selecting the highest supported alternate setting without reading past alts[].

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: skip expectations in other netns via proc Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc").

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink ...

In the Linux kernel, the following vulnerability has been resolved: net: macb: use the current queue number for stats There's a potential mismatch between the memory reserved for statistics and the amount of memory written. gem_get_sset_count() correctly computes the number of stats based on the active queues, whereas gem_get_ethtool_stats() indiscriminately copies data using the maximum number of queues, and in the case the number of active queues is less than MACB_MAX_QUEUES, this results in a OOB write as observed in the KASAN splat. ================================================================== BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb] Write of size 760 at addr ffff80008080b000 by task ethtool/1027 CPU: [...] Tainted: [E]=UNSIGNED_MODULE Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_m...

In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix use of completion ctx after free On admin queue completion handling, if the admin command completed with error we print data from the completion context. The issue is that we already freed the completion context in polling/interrupts handler which means we print data from context in an unknown state (it might be already used again). Change the admin submission flow so alloc/dealloc of the context will be symmetric and dealloc will be called after any potential use of the context.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Initialize free_qp completion before using it In irdma_create_qp, if ib_copy_to_udata fails, it will call irdma_destroy_qp to clean up which will attempt to wait on the free_qp completion, which is not initialized yet. Fix this by initializing the completion before the ib_copy_to_udata call.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Harden depth calculation functions An issue was exposed where OS can pass in U32_MAX for SQ/RQ/SRQ size. This can cause integer overflow and truncation of SQ/RQ/SRQ depth returning a success when it should have failed. Harden the functions to do all depth calculations and boundary checking in u64 sizes.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix use-after-free in migration restore When an error is returned from xe_sriov_pf_migration_restore_produce(), the data pointer is not set to NULL, which can trigger use-after-free in subsequent .write() calls. Set the pointer to NULL upon error to fix the problem. (cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819)

In the Linux kernel, the following vulnerability has been resolved: spi: meson-spicc: Fix double-put in remove path meson_spicc_probe() registers the controller with devm_spi_register_controller(), so teardown already drops the controller reference via devm cleanup. Calling spi_controller_put() again in meson_spicc_remove() causes a double-put.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not skip unrelated mode changes in DSC validation Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs w...

In the Linux kernel, the following vulnerability has been resolved: spi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n".

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) Protect regulator operations with mutex The regulator operations pmbus_regulator_get_voltage(), pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage() access PMBus registers and shared data but were not protected by the update_lock mutex. This could lead to race conditions. However, adding mutex protection directly to these functions causes a deadlock because pmbus_regulator_notify() (which calls regulator_notifier_call_chain()) is often called with the mutex already held (e.g., from pmbus_fault_handler()). If a regulator callback then calls one of the now-protected voltage functions, it will attempt to acquire the same mutex. Rework pmbus_regulator_notify() to utilize a worker function to send notifications outside of the mutex protection. Events are stored as atomics in a per-page bitmask and processed by the worker. Initialize the worker and its associated data during regulator regi...

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from...

In the Linux kernel, the following vulnerability has been resolved: io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check __io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second half of the SQE would be past the end of the sq_sqes array. The current check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented when a 128-byte SQE is encountered, not on every iteration. The actual array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask (the last slot) while the wrap check passes. Fix by checking sq_idx directly. Keep the sq_head increment so the loop still skips the second half of the 128-byte SQE on the next iteration.

In the Linux kernel, the following vulnerability has been resolved: s390/syscalls: Add spectre boundary for syscall dispatch table The s390 syscall number is directly controlled by userspace, but does not have an array_index_nospec() boundary to prevent access past the syscall function pointer tables.

In the Linux kernel, the following vulnerability has been resolved: s390/entry: Scrub r12 register on kernel entry Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"), all entry handlers loaded r12 with the current task pointer (lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That commit removed TIF_ISOLATE_BP, dropping both the branch prediction macros and the r12 load, but did not add r12 to the register clearing sequence. Add the missing xgr %r12,%r12 to make the register scrub consistent across all entry points.

In the Linux kernel, the following vulnerability has been resolved: tracing: Drain deferred trigger frees if kthread creation fails Boot-time trigger registration can fail before the trigger-data cleanup kthread exists. Deferring those frees until late init is fine, but the post-boot fallback must still drain the deferred list if kthread creation never succeeds. Otherwise, boot-deferred nodes can accumulate on trigger_data_free_list, later frees fall back to synchronously freeing only the current object, and the older queued entries are leaked forever. To trigger this, add the following to the kernel command line: trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon The second traceon trigger will fail and be freed. This triggers a NULL pointer dereference and crashes the kernel. Keep the deferred boot-time behavior, but when kthread creation fails, drain the whole queued list synchronously. Do the same in the late-init drain path so queued entries are no...

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential deadlock in cpu hotplug with osnoise The following sequence may leads deadlock in cpu hotplug: task1 task2 task3 ----- ----- ----- mutex_lock(&interface_lock) [CPU GOING OFFLINE] cpus_write_lock(); osnoise_cpu_die(); kthread_stop(task3); wait_for_completion(); osnoise_sleep(); mutex_lock(&interface_lock); cpus_read_lock(); [DEAD LOCK] Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock).