In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Zero the tile state data array before each BIN job The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the "Auto-initialise Tile State Data Array" flag in the tile binning mode configuration, the PTB demonstrably still acts on stale tile state left by the slot's previous user: the binner ends up creating invalid command streams with invalid primitive streams and branches, which can cause GPU hangs as observed in [1][2]. Zero the TSDA when the job's binn...

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: reject firmware sections with oversized data In panthor_fw_load_section_entry(), the data size to copy is calculated without validating it against the allocated section_size: section->data.size = hdr.data.end - hdr.data.start; If a crafted firmware sets data.size larger than the allocated memory, this could cause a heap buffer overflow in panthor_fw_init_section_mem() memcpy(section->mem->kmap, section->data.buf, section->data.size); Additionally, if the section->data.size exceeds the BO size, could this memset underflow the size calculation, leading to a massive out-of-bounds zeroing of kernel memory? memset(section->mem->kmap + section->data.size, 0, panthor_kernel_bo_size(section->mem) - section->data.size); Reject section entries whose initial data is larger than the section size.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate firmware interface structure sizes iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual address points inside the shared section. The returned pointer is later used as a full firmware interface structure, so accepting an address near the end of the shared section can still lead to out-of-bounds accesses. Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges that do not fit entirely in the shared section.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix pptable use-after-free amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table after dropping adev->pm.mutex. The sysfs path then copies from that pointer. A concurrent pp_table write can replace and free the allocation during the copy, causing a use-after-free. Change the DPM interface to copy into caller-provided storage while the mutex is held. Keep the size-only query for attribute discovery without exposing the driver-owned pointer. (cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da)

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix QID bit leak in pqm_create_queue() When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during the first queue creation for a process, pqm_create_queue() returns early via 'return retval' without going through the err_create_queue cleanup label. This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called, leaving the reserved QID bit permanently set in queue_slot_bitmap. Over time this leaks QID slots, potentially exhausting all available queue slots. Fix this by replacing 'return retval' with 'goto err_allocate_pqn' so that clear_bit() is always called on the error path without touching the uninitialized pqn pointer. AILIKFD-813 (cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f)

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment eop_ring_buffer_size in struct queue_properties is a u32. In kfd_queue_acquire_buffers() the expected EOP buffer size is computed as ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to 0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB BO, so CP EOP writes can land past the buffer and fault the GPU. Cast the operand to u64 so the alignment is computed in 64-bit; the size check in kfd_queue_buffer_get() then rejects the oversized request. (cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef)

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it. Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk iterates more entries than were counted and writes past the end of the ev_privs allocation; if an event is removed, the walk dereferences an entry that is being freed. Hold p->event_mutex across the count and the walk so both observe a consistent view of p->event_idr. The lock is released before copy_to_user(), which only touches the local buffer. Th...

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up front before any relocation state is published.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low m...

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix race condition and ordering in port unregistration A synchronization issue exists during port unregistration where pending partner work items can race against workqueue destruction, leading to use-after-free conditions: cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:__queue_work+0x83/0x4a0 Call Trace: <IRQ> __cfi_delayed_work_timer_fn+0x10/0x10 run_timer_softirq+0x3b6/0xbd0 sched_clock_cpu+0xc/0x110 irq_exit_rcu+0x18d/0x330 fred_sysvec_apic_timer_interrupt+0x5e/0x80 Fix this by ensuring strict ordering and proper serialization during teardown: 1. Move ucsi_unregister_partner() to the beginning of the teardown sequence and protect it under the connector mutex lock. 2. Ensure all pending partner tasks are explicitly flushed and finished before the workqueue is destroyed. 3. Switch from mod_delayed_work(...

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Wait on external BO kernel fences in exec IOCTL Before arming a user job, xe_exec_ioctl() only added the VM's dma-resv KERNEL slot as a dependency. That slot covers rebinds and the kernel operations of the VM's private BOs, but not external BOs (bo->vm == NULL), which carry their kernel operations (evictions, moves, ...) in their own dma-resv KERNEL slot. The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for memory management operations that must complete before the BO or its backing store may be used: any accessor is required to wait on the KERNEL fences before touching the resv. By skipping the external BOs' KERNEL slots, the exec path violated that contract and could schedule a user job while a kernel operation on an external BO mapped by the VM was still in flight, racing against it and potentially reading or writing memory that was being moved. Replace the VM-only dependency with an iteration ...

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry device_pasid_table_teardown() zeroes the 128-bit scalable-mode context entry with context_clear_entry() while the Present bit is still set. This creates a window where the hardware can fetch a torn entry, with some fields already zeroed while Present is still set, leading to unpredictable behavior or spurious faults. The context-cache invalidation is issued only after the entry has been zeroed, and intel_pasid_free_table() then frees the PASID directory pages, so the IOMMU can keep walking a stale Present=1 entry that points at freed memory. While x86 provides strong write ordering, the compiler may reorder the two 64-bit writes to the entry, and the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Commit c1e4f1dccbe9d ("iommu/vt-d: Clear Present bit before tearing down context entry") fixed this exact pat...

In the Linux kernel, the following vulnerability has been resolved: crypto: sun4i-ss - Remove insecure and unused rng_alg Remove sun4i_ss_rng, as it is insecure and unused: - It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing locking and has a buffer overflow. sun4i_ss_prng_generate() fails to fill the entire buffer with cryptographic random bytes, because it rounds the destination length down and also doesn't actually wait for the hardware to be ready before pulling bytes from it. - No user of this code is known. It's usable only theoretically via the "rng" algorithm type of AF_ALG. But userspace actually just uses the actual Linux RNG (/dev/random etc) instead. And rng_algs don't contribute entropy to the actual Linux RNG either. (This may have been confused with hwrng, which does contribute entropy.) The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen and discovered by Atuin - Automated Vulnerability Discovery Engine There's no point in fixin...

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix deadlock if uvc_status_stop is called from async_ctrl.work If a UVC camera has an asynchronous control, uvc_status_stop may be called from async_ctrl.work: uvc_ctrl_status_event_work() uvc_ctrl_status_event() uvc_ctrl_clear_handle() uvc_pm_put() uvc_status_put() uvc_status_stop() cancel_work_sync() This will cause a deadlock, since cancel_work_sync will wait for uvc_ctrl_status_event_work to complete before returning. Fix this by returning early from uvc_status_stop if we are currently in the work function. flush_status now remains false until uvc_status_start is called again, ensuring that uvc_ctrl_status_event_work won't resubmit the URB.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: serialize kernel accept preallocation with socket teardown rxrpc_kernel_charge_accept() reads rx->backlog without any socket/backlog synchronization and passes that raw pointer into rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc() sets rx->backlog = NULL and frees the backlog rings, so a kernel preallocation worker can keep using a freed struct rxrpc_backlog while updating *_backlog_head/tail and array slots. Serialize the state check and backlog lookup with the socket lock, and reject kernel preallocation once teardown has disabled listening or discarded the service backlog.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the rxrpc_call.rx_dec_buffer is unallocated and assumes that upon successful return that rx_dec_buffer must be allocated. However, rxrpc_verify_data() does not request an allocation if the rxrpc_skb_priv.len is zero. In addition, failure to allocate rx_dec_buffer will result in a call to skb_copy_bits() with a NULL destination which can trigger a NULL pointer dereference. To prevent these issues rxrpc_verify_data() is modified to always attempt to allocate the rxrpc_call.rx_dec_buffer if it is NULL. This issue was identified with assistance of a private sashiko instance.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Don't move a peeked OOB message onto the pending queue rxrpc_recvmsg_oob() takes a received oob message off recvmsg_oobq and, if a response is needed, moves it onto the pending_oobq tree. However, only the unlink from recvmsg_oobq is guarded by MSG_PEEK; the move onto pending_oobq always runs. As a result, reading a challenge with MSG_PEEK leaves the skb on recvmsg_oobq while also adding it to pending_oobq. Since struct sk_buff's rbnode shares storage with its next and prev pointers, rb_insert_color() overwrites the list linkage, and the skb, which holds a single reference, becomes reachable from both queues at once. When the socket is closed both queues are drained in turn. While draining recvmsg_oobq, __skb_unlink() follows the next and prev pointers that rbnode has overwritten and writes to a bad address. Also, as the skb holds a single reference but is freed from each queue, both the skb and the connectio...