In the Linux kernel, the following vulnerability has been resolved: ext4: fix dirtyclusters double decrement on fs shutdown fstests test generic/388 occasionally reproduces a warning in ext4_put_super() associated with the dirty clusters count: WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4] Tracing the failure shows that the warning fires due to an s_dirtyclusters_counter value of -1. IOW, this appears to be a spurious decrement as opposed to some sort of leak. Further tracing of the dirty cluster count deltas and an LLM scan of the resulting output identified the cause as a double decrement in the error path between ext4_mb_mark_diskspace_used() and the caller ext4_mb_new_blocks(). First, note that generic/388 is a shutdown vs. fsstress test and so produces a random set of operations and shutdown injections. In the problematic case, the shutdown triggers an error return from the ext4_handle_dirty_metadata() call(s) made from ext4_mb_mark_contex...

In the Linux kernel, the following vulnerability has been resolved: sched/rt: Skip currently executing CPU in rto_next_cpu() CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound RT task, and a CFS task stuck in kernel space. When other CPUs switch from RT to non-RT tasks, RT load balancing (LB) is triggered; with HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution of rto_push_irq_work_func. During push_rt_task on CPU0, if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED and after the push operation completes, CPU0 calls rto_next_cpu(). Since only CPU0 is overloaded in this scenario, rto_next_cpu() should ideally return -1 (no further IPI needed). However, multiple CPUs invoking tell_cpu_to_push() during LB increments rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its search from -1. With CPU0 remaining overloaded (satisfying rt_...

In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - don't deref NULL sk_socket member after tcp_close() When deleting a peer in case of keepalive expiration, the peer is removed from the OpenVPN hashtable and is temporary inserted in a "release list" for further processing. This happens in: ovpn_peer_keepalive_work() unlock_ovpn(release_list) This processing includes detaching from the socket being used to talk to this peer, by restoring its original proto and socket ops/callbacks. In case of TCP it may happen that, while the peer is sitting in the release list, userspace decides to close the socket. This will result in a concurrent execution of: tcp_close(sk) __tcp_close(sk) sock_orphan(sk) sk_set_socket(sk, NULL) The last function call will set sk->sk_socket to NULL. When the releasing routine is resumed, ovpn_tcp_socket_detach() will attempt to dereference sk->sk_socket to restore its original ops member. This operation will crash due to sk->sk_socket ...

In the Linux kernel, the following vulnerability has been resolved: ipvs: do not keep dest_dst if dev is going down There is race between the netdev notifier ip_vs_dst_event() and the code that caches dst with dev that is going down. As the FIB can be notified for the closed device after our handler finishes, it is possible valid route to be returned and cached resuling in a leaked dev reference until the dest is not removed. To prevent new dest_dst to be attached to dest just after the handler dropped the old one, add a netif_running() check to make sure the notifier handler is not currently running for device that is closing.

In the Linux kernel, the following vulnerability has been resolved: power: supply: sbs-battery: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply`...

In the Linux kernel, the following vulnerability has been resolved: fat: avoid parent link count underflow in rmdir Corrupted FAT images can leave a directory inode with an incorrect i_nlink (e.g. 2 even though subdirectories exist). rmdir then unconditionally calls drop_nlink(dir) and can drive i_nlink to 0, triggering the WARN_ON in drop_nlink(). Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the parent link count when it is at least 3, otherwise report a filesystem error.

In the Linux kernel, the following vulnerability has been resolved: Revert "hwmon: (ibmpex) fix use-after-free in high/low store" This reverts commit 6946c726c3f4c36f0f049e6f97e88c510b15f65d. Jean Delvare points out that the patch does not completely fix the reported problem, that it in fact introduces a (new) race condition, and that it may actually not be needed in the first place. Various AI reviews agree. Specific and relevant AI feedback: " This reordering sets the driver data to NULL before removing the sensor attributes in the loop below. ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but does not check if it is NULL before dereferencing it to access data->sensors[]. If a userspace process reads a sensor file (like temp1_input) while this delete function is running, could it race with the dev_set_drvdata(..., NULL) call here and crash in ibmpex_show_sensor()? Would it be safer to keep the original order where device_remove_file() is called before cleari...

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: always update mdb_n_entries for vlan contexts syzbot triggered a warning[1] about the number of mdb entries in a context. It turned out that there are multiple ways to trigger that warning today (some got added during the years), the root cause of the problem is that the increase is done conditionally, and over the years these different conditions increased so there were new ways to trigger the warning, that is to do a decrease which wasn't paired with a previous increase. For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif...

In the Linux kernel, the following vulnerability has been resolved: ext4: don't cache extent during splitting extent Caching extents during the splitting process is risky, as it may result in stale extents remaining in the status tree. Moreover, in most cases, the corresponding extent block entries are likely already cached before the split happens, making caching here not particularly useful. Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, when ext4_split_extent_at() splits this extent, it truncates the existing extent and then inserts a new one. During this process, this extent status entry may be shrunk, and calls to ext4_find_extent() and ext4_cache_extents() may occur, which could potentially insert the truncated range as a hole into the extent status tree. After the split is completed, this hole is not replaced w...

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, ...

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a ...

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Drop __initconst from gates Since commit 8ceff24a754a ("clk: mediatek: clk-gate: Refactor mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs are no longer just used for initialization/registration, but also at runtime. So drop __initconst annotations.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlocks between devlink and netdev instance locks In the mentioned "Fixes" commit, various work tasks triggering devlink health reporter recovery were switched to use netdev_trylock to protect against concurrent tear down of the channels being recovered. But this had the side effect of introducing potential deadlocks because of incorrect lock ordering. The correct lock order is described by the init flow: probe_one -> mlx5_init_one (acquires devlink lock) -> mlx5_init_one_devl_locked -> mlx5_register_device -> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe -> register_netdev (acquires rtnl lock) -> register_netdevice (acquires netdev lock) => devlink lock -> rtnl lock -> netdev lock. But in the current recovery flow, the order is wrong: mlx5e_tx_err_cqe_work (acquires netdev lock) -> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report -> devlink_health_report (acquires devlink lock => bo...

In the Linux kernel, the following vulnerability has been resolved: power: supply: pf1550: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` hand...

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path icmp_route_lookup() performs multiple route lookups to find a suitable route for sending ICMP error messages, with special handling for XFRM (IPsec) policies. The lookup sequence is: 1. First, lookup output route for ICMP reply (dst = original src) 2. Pass through xfrm_lookup() for policy check 3. If blocked (-EPERM) or dst is not local, enter "reverse path" 4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec which reverses the original packet's flow (saddr<->daddr swapped) 5. If fl4_dec.saddr is local (we are the original destination), use __ip_route_output_key() for output route lookup 6. If fl4_dec.saddr is NOT local (we are a forwarding node), use ip_route_input() to simulate the reverse packet's input path 7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag The bug occurs in step 6: ip_route_input() is called with fl4...

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") restructured the EEH driver to improve synchronization with the PCI hotplug layer. However, it inadvertently moved pci_lock_rescan_remove() outside its intended scope in eeh_handle_normal_event(), leading to broken PCI error reporting and improper EEH event triggering. Specifically, eeh_handle_normal_event() acquired pci_lock_rescan_remove() before calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to acquire the same lock internally, causing nested locking and disrupting normal EEH event handling paths. This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(), with two public wrappers: eeh_pe_bus_get() with locking enabled. eeh_pe_bus_get_nolock() that skips locking. Callers that already hold pci_lock_rescan_remove() now use eeh_pe_bu...

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"), the verifier started relying on the access type flags in helper function prototypes to perform memory access optimizations. Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the verifier to incorrectly assume that the buffer contents are unchanged across the helper call. Consequently, the verifier may optimize away subsequent reads based on this wrong assumption, leading to correctness issues. For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM which correctly indicates write access to potentially uninitialized memory. Similar issues were recently addressed for specific helpers in commit ac44dcc788b9 ("bpf: Fix...

In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` han...

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: revert commit_mutex usage in reset path It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set' rule run at the same time. Previous patches made it safe to run individual reset handlers concurrently so commit_mutex is no longer required to prevent this.