Количество 54 066
Количество 54 066
CVE-2026-18726
A flaw was found in open-iscsi. This vulnerability allows a remote attacker on the same local network segment to cause a Denial of Service (DoS) in the iscsiuio daemon. By sending a specially crafted Internet Control Message Protocol version 6 (ICMPv6) Router Advertisement with a zero-length option, the attacker can trigger an infinite loop. This leads to sustained CPU usage, rendering the daemon unresponsive and impacting system availability. A secondary risk of out-of-bounds reads exists with a short IPv6 payload, though no memory corruption or data exposure has been confirmed.
CVE-2026-18725
AI_ONLY_REPORT package: iscsi-initiator-utils-6.2.1.11-0.git4b3e853.el10 ------ Summary: Out-of-Bounds Write and Information Disclosure via Unvalidated IPv6 Payload Length: crafted ICMPv6 Echo Requests can cause `iscsiuio` to trust an inflated `ipv6_plen` larger than the actual received payload, leading to MTU-bounded out-of-bounds reads and a potential one-byte out-of-bounds write that may disclose data beyond the valid packet boundary. Requirements to exploit: Adjacent-network access on the same L2 segment as a system running `iscsiuio` on an interface that processes IPv6/NDP traffic, plus the ability to send a crafted ICMPv6 Echo Request with a forged `IPv6.plen`. No authentication or user interaction is required. Component affected: `iscsi-initiator-utils` (`iscsiuio`): `iscsiuio/src/uip/ipv6.c` in `ipv6_icmp_handle_echo_request()` and `ipv6_insert_protocol_chksum()`. Version affected: `iscsi-initiator-utils-6.2.1.11-0.git4b3e853.el10` when `iscsiuio` is proc...
CVE-2026-18724
AI_ONLY_REPORT package: iscsi-initiator-utils-6.2.1.11-0.git4b3e853.el10 ------ Summary: Stack Buffer Overflow in idbm_recinfo_config via Malicious iSCSI Target: a crafted SendTargets TargetName can inject an extra configuration line into a persisted node record and later cause a stack buffer overflow when that record is reparsed. Requirements to exploit: An attacker must control an iSCSI target or tamper with SendTargets discovery traffic, return a crafted `TargetName` containing a newline and oversized injected key or value data, have the victim run persistent discovery, and then trigger a later node-record read such as update or login. Component affected: `iscsi-initiator-utils`; `usr/idbm.c:idbm_recinfo_config`, with attacker-controlled input reaching it through SendTargets handling in `usr/discovery.c` and later record serialization in `usr/idbm.c`. Version affected: `iscsi-initiator-utils-6.2.1.11-0.git4b3e853.el10` Patch available: no released package fix ...
CVE-2026-18663
A flaw was found in 389-ds-base. The get_ldapmessage_controls_ext() function frees the parsed controls array on the Session Tracking critical-control rejection path without clearing the SLAPI_REQCONTROLS pblock slot. Operation teardown then frees the same pointer again, causing a double-free. An unauthenticated remote attacker can trigger this with a single BIND request carrying a critical Session Tracking control, resulting in heap corruption and potential denial of service.
CVE-2026-18651
A flaw was found in 389 Directory Server. During SASL PLAIN authentication, the server installs connection-level bind credentials before performing the account-lock check. If the account is subsequently found to be locked, the bind is reported as failed to the client, but the already-installed authenticated state on the connection is not reverted. A client that supplies valid credentials for an account that has been administratively locked can continue to use the same connection with that account's privileges, defeating account lock as an access-revocation control.
CVE-2026-18649
A flaw was found in the GStreamer gst-plugins-good package. The rtph264depay and rtph265depay RTP depayloader elements do not enforce a maximum size limit on the reassembly buffer used during fragmented RTP packet processing. A remote, unauthenticated attacker can send a continuous stream of RTP fragments without ever transmitting an end-of-fragment marker, causing the reassembly buffer to grow without bound until process memory is exhausted. This results in a denial of service through process termination.
CVE-2026-18621
A flaw was found in Data Science Pipelines (DSP). An attacker with namespace editor privileges can bypass security hardening by submitting a malicious Argo Workflow through the V1 API path. This allows the API server to create pods with elevated privileges, acting as a 'confused deputy' on behalf of the attacker. Successful exploitation grants the attacker node-root access, enabling arbitrary code execution and full control over the underlying node.
CVE-2026-18620
A flaw was found in Data Science Pipelines. A restricted user, or tenant, can exploit an improper authorization vulnerability in the setDefaultServiceAccount function. By specifying a more privileged ServiceAccount (SA) during a CreateRun request, an attacker can bypass authorization checks. This allows the tenant to run their containers with elevated privileges, potentially leading to the disclosure of sensitive information (secrets) and the ability to execute commands within other users' pods.
CVE-2026-18618
A flaw was found in ml-metadata. The statically-linked gRPC stack in ml-metadata is outdated, making it vulnerable to known HTTP/2 denial of service (DoS) issues. An in-cluster attacker, with network access to the MLMD pod, could exploit these vulnerabilities by sending specially crafted HTTP/2 requests. This could lead to a denial of service by crashing the MLMD pod, disrupting all pipeline runs in the affected namespace.
CVE-2026-18617
A flaw was found in the Data Science Pipelines Operator (DSPO). A namespace editor can exploit a vulnerability in the spec.database.customExtraParams field, which allows for the injection of dangerous parameters into the MySQL Data Source Name (DSN) string. By manipulating these parameters, an attacker can enable LOCAL INFILE functionality and exfiltrate sensitive files, such as the service account token, from the operator pod. This can lead to privilege escalation, allowing a namespace editor to gain cluster-admin privileges.
CVE-2026-18611
A flaw was found in the Data Science Pipelines Operator. This vulnerability allows an unauthenticated attacker to derive sensitive credentials, such as MariaDB root/user passwords and MinIO access/secret keys, if they can access the MinIO Route or MariaDB Service. The flaw occurs because the operator uses a cryptographically weak pseudo-random number generator (PRNG) to generate these credentials, making them predictable. Successful exploitation could lead to unauthorized access to all pipeline artifacts and metadata, resulting in significant information disclosure.
CVE-2026-18608
A flaw was found in the Data Science Pipelines Operator (DSPO). The operator's ClusterRole, which defines its permissions, includes extensive privileges beyond what is necessary for its operation. These excessive permissions, such as the ability to execute commands within pods and manage cluster-wide roles, could be exploited. If the DSPO pod were compromised, an attacker could leverage these privileges to gain full administrative control over the entire Kubernetes cluster.
CVE-2026-18573
A flaw was found in the keycloak-services component of Keycloak, which is used for managing authentication and authorization flows. The issue occurs when a realm administrator configures client policies to enforce specific authentication requirements on confidential clients. Due to improper evaluation of the client state during an update operation, an attacker with client management permissions can bypass these security policies by first creating a public client and then updating it to a confidential client with weaker authentication. This can result in the persistence of clients that do not comply with the intended security hardening of the realm.
CVE-2026-18572
Keycloak provides authorization services that allow administrators to restrict access to resources based on time policies (for example, only allowing access during business hours). A flaw was discovered where a user can include a fake time value in their authorization request that overrides the actual server time. This allows the user to bypass these time-based restrictions and access protected resources at unauthorized times.
CVE-2026-18571
A flaw was found in the user creation component of Keycloak when Fine-Grained Admin Permissions V2 (FGAP V2) is enabled. This issue allows a sub-administrator with permission to create users to add those users to any group, even groups the sub-administrator is not authorized to manage. This could lead to unauthorized access to sensitive information or elevated privileges for the newly created users.
CVE-2026-18570
A flaw was found in the full-scope-disabled client-policy executor within the keycloak-services component. This component is responsible for enforcing security policies during client registration and configuration in Red Hat Build of Keycloak. The issue occurs because the executor only validates the fullScopeAllowed field when it is explicitly provided in a request. By omitting this field, a delegated user can bypass the policy, resulting in a client created with full scope access. This allows the client to obtain tokens with unauthorized role mappings.
CVE-2026-18569
A flaw was found in the backchannel logout endpoint of the keycloak-services component, which is part of the Red Hat Build of Keycloak. This component handles authentication and session management for applications. The issue occurs when an OIDC identity provider is configured to skip signature validation. In this specific setup, the system incorrectly accepts logout requests that have no cryptographic signature. An attacker who knows certain technical details about a user's session can use this flaw to force that user to be logged out, potentially disrupting their work.
CVE-2026-18536
Data::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP. The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HTTP. The Data::Entropy::RawSource::RandomOrg integrity check trivially matches any non-empty byte string. Any on-path attacker, such as open WiFi, a compromised ISP, captive portal, or a hostile egress proxy substitutes the response and thereby chooses the bytes returned by rand_bits and rand_int for every application that selected one of these sources via with_entropy_source. The _checkbuf method response is equally attacker-controlled, so the retry/sleep behaviour is steerable too.
CVE-2026-18508
A flaw was found in GNU tar. When extracting an archive with the --one-top-level option, hardlink targets are not confined to the designated top-level directory and may resolve relative to the extraction working directory. A crafted archive can create hardlinks that escape the intended boundary and, when combined with a preexisting symbolic link under the working directory, may allow writing outside that boundary during a single extraction.
CVE-2026-18477
A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue.
Уязвимостей на страницу
Уязвимость | CVSS | EPSS | Опубликовано | |
|---|---|---|---|---|
CVE-2026-18726 A flaw was found in open-iscsi. This vulnerability allows a remote attacker on the same local network segment to cause a Denial of Service (DoS) in the iscsiuio daemon. By sending a specially crafted Internet Control Message Protocol version 6 (ICMPv6) Router Advertisement with a zero-length option, the attacker can trigger an infinite loop. This leads to sustained CPU usage, rendering the daemon unresponsive and impacting system availability. A secondary risk of out-of-bounds reads exists with a short IPv6 payload, though no memory corruption or data exposure has been confirmed. | CVSS3: 6.5 | 0% Низкий | 4 дня назад | |
CVE-2026-18725 AI_ONLY_REPORT package: iscsi-initiator-utils-6.2.1.11-0.git4b3e853.el10 ------ Summary: Out-of-Bounds Write and Information Disclosure via Unvalidated IPv6 Payload Length: crafted ICMPv6 Echo Requests can cause `iscsiuio` to trust an inflated `ipv6_plen` larger than the actual received payload, leading to MTU-bounded out-of-bounds reads and a potential one-byte out-of-bounds write that may disclose data beyond the valid packet boundary. Requirements to exploit: Adjacent-network access on the same L2 segment as a system running `iscsiuio` on an interface that processes IPv6/NDP traffic, plus the ability to send a crafted ICMPv6 Echo Request with a forged `IPv6.plen`. No authentication or user interaction is required. Component affected: `iscsi-initiator-utils` (`iscsiuio`): `iscsiuio/src/uip/ipv6.c` in `ipv6_icmp_handle_echo_request()` and `ipv6_insert_protocol_chksum()`. Version affected: `iscsi-initiator-utils-6.2.1.11-0.git4b3e853.el10` when `iscsiuio` is proc... | CVSS3: 6.3 | 5 дней назад | ||
CVE-2026-18724 AI_ONLY_REPORT package: iscsi-initiator-utils-6.2.1.11-0.git4b3e853.el10 ------ Summary: Stack Buffer Overflow in idbm_recinfo_config via Malicious iSCSI Target: a crafted SendTargets TargetName can inject an extra configuration line into a persisted node record and later cause a stack buffer overflow when that record is reparsed. Requirements to exploit: An attacker must control an iSCSI target or tamper with SendTargets discovery traffic, return a crafted `TargetName` containing a newline and oversized injected key or value data, have the victim run persistent discovery, and then trigger a later node-record read such as update or login. Component affected: `iscsi-initiator-utils`; `usr/idbm.c:idbm_recinfo_config`, with attacker-controlled input reaching it through SendTargets handling in `usr/discovery.c` and later record serialization in `usr/idbm.c`. Version affected: `iscsi-initiator-utils-6.2.1.11-0.git4b3e853.el10` Patch available: no released package fix ... | CVSS3: 7.6 | 5 дней назад | ||
CVE-2026-18663 A flaw was found in 389-ds-base. The get_ldapmessage_controls_ext() function frees the parsed controls array on the Session Tracking critical-control rejection path without clearing the SLAPI_REQCONTROLS pblock slot. Operation teardown then frees the same pointer again, causing a double-free. An unauthenticated remote attacker can trigger this with a single BIND request carrying a critical Session Tracking control, resulting in heap corruption and potential denial of service. | CVSS3: 5.9 | 0% Низкий | 5 дней назад | |
CVE-2026-18651 A flaw was found in 389 Directory Server. During SASL PLAIN authentication, the server installs connection-level bind credentials before performing the account-lock check. If the account is subsequently found to be locked, the bind is reported as failed to the client, but the already-installed authenticated state on the connection is not reverted. A client that supplies valid credentials for an account that has been administratively locked can continue to use the same connection with that account's privileges, defeating account lock as an access-revocation control. | CVSS3: 5.4 | 0% Низкий | 14 дней назад | |
CVE-2026-18649 A flaw was found in the GStreamer gst-plugins-good package. The rtph264depay and rtph265depay RTP depayloader elements do not enforce a maximum size limit on the reassembly buffer used during fragmented RTP packet processing. A remote, unauthenticated attacker can send a continuous stream of RTP fragments without ever transmitting an end-of-fragment marker, causing the reassembly buffer to grow without bound until process memory is exhausted. This results in a denial of service through process termination. | CVSS3: 7.5 | 1% Низкий | 11 дней назад | |
CVE-2026-18621 A flaw was found in Data Science Pipelines (DSP). An attacker with namespace editor privileges can bypass security hardening by submitting a malicious Argo Workflow through the V1 API path. This allows the API server to create pods with elevated privileges, acting as a 'confused deputy' on behalf of the attacker. Successful exploitation grants the attacker node-root access, enabling arbitrary code execution and full control over the underlying node. | CVSS3: 7.6 | 0% Низкий | 6 дней назад | |
CVE-2026-18620 A flaw was found in Data Science Pipelines. A restricted user, or tenant, can exploit an improper authorization vulnerability in the setDefaultServiceAccount function. By specifying a more privileged ServiceAccount (SA) during a CreateRun request, an attacker can bypass authorization checks. This allows the tenant to run their containers with elevated privileges, potentially leading to the disclosure of sensitive information (secrets) and the ability to execute commands within other users' pods. | CVSS3: 7.1 | 0% Низкий | 6 дней назад | |
CVE-2026-18618 A flaw was found in ml-metadata. The statically-linked gRPC stack in ml-metadata is outdated, making it vulnerable to known HTTP/2 denial of service (DoS) issues. An in-cluster attacker, with network access to the MLMD pod, could exploit these vulnerabilities by sending specially crafted HTTP/2 requests. This could lead to a denial of service by crashing the MLMD pod, disrupting all pipeline runs in the affected namespace. | CVSS3: 7.5 | 1% Низкий | 6 дней назад | |
CVE-2026-18617 A flaw was found in the Data Science Pipelines Operator (DSPO). A namespace editor can exploit a vulnerability in the spec.database.customExtraParams field, which allows for the injection of dangerous parameters into the MySQL Data Source Name (DSN) string. By manipulating these parameters, an attacker can enable LOCAL INFILE functionality and exfiltrate sensitive files, such as the service account token, from the operator pod. This can lead to privilege escalation, allowing a namespace editor to gain cluster-admin privileges. | CVSS3: 8.8 | 0% Низкий | 6 дней назад | |
CVE-2026-18611 A flaw was found in the Data Science Pipelines Operator. This vulnerability allows an unauthenticated attacker to derive sensitive credentials, such as MariaDB root/user passwords and MinIO access/secret keys, if they can access the MinIO Route or MariaDB Service. The flaw occurs because the operator uses a cryptographically weak pseudo-random number generator (PRNG) to generate these credentials, making them predictable. Successful exploitation could lead to unauthorized access to all pipeline artifacts and metadata, resulting in significant information disclosure. | CVSS3: 7.5 | 0% Низкий | 6 дней назад | |
CVE-2026-18608 A flaw was found in the Data Science Pipelines Operator (DSPO). The operator's ClusterRole, which defines its permissions, includes extensive privileges beyond what is necessary for its operation. These excessive permissions, such as the ability to execute commands within pods and manage cluster-wide roles, could be exploited. If the DSPO pod were compromised, an attacker could leverage these privileges to gain full administrative control over the entire Kubernetes cluster. | CVSS3: 8.7 | 0% Низкий | 6 дней назад | |
CVE-2026-18573 A flaw was found in the keycloak-services component of Keycloak, which is used for managing authentication and authorization flows. The issue occurs when a realm administrator configures client policies to enforce specific authentication requirements on confidential clients. Due to improper evaluation of the client state during an update operation, an attacker with client management permissions can bypass these security policies by first creating a public client and then updating it to a confidential client with weaker authentication. This can result in the persistence of clients that do not comply with the intended security hardening of the realm. | CVSS3: 6.5 | 0% Низкий | 18 дней назад | |
CVE-2026-18572 Keycloak provides authorization services that allow administrators to restrict access to resources based on time policies (for example, only allowing access during business hours). A flaw was discovered where a user can include a fake time value in their authorization request that overrides the actual server time. This allows the user to bypass these time-based restrictions and access protected resources at unauthorized times. | CVSS3: 6.5 | 0% Низкий | 18 дней назад | |
CVE-2026-18571 A flaw was found in the user creation component of Keycloak when Fine-Grained Admin Permissions V2 (FGAP V2) is enabled. This issue allows a sub-administrator with permission to create users to add those users to any group, even groups the sub-administrator is not authorized to manage. This could lead to unauthorized access to sensitive information or elevated privileges for the newly created users. | CVSS3: 6.6 | 0% Низкий | 18 дней назад | |
CVE-2026-18570 A flaw was found in the full-scope-disabled client-policy executor within the keycloak-services component. This component is responsible for enforcing security policies during client registration and configuration in Red Hat Build of Keycloak. The issue occurs because the executor only validates the fullScopeAllowed field when it is explicitly provided in a request. By omitting this field, a delegated user can bypass the policy, resulting in a client created with full scope access. This allows the client to obtain tokens with unauthorized role mappings. | CVSS3: 5.4 | 0% Низкий | 18 дней назад | |
CVE-2026-18569 A flaw was found in the backchannel logout endpoint of the keycloak-services component, which is part of the Red Hat Build of Keycloak. This component handles authentication and session management for applications. The issue occurs when an OIDC identity provider is configured to skip signature validation. In this specific setup, the system incorrectly accepts logout requests that have no cryptographic signature. An attacker who knows certain technical details about a user's session can use this flaw to force that user to be logged out, potentially disrupting their work. | CVSS3: 3.7 | 0% Низкий | 17 дней назад | |
CVE-2026-18536 Data::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP. The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HTTP. The Data::Entropy::RawSource::RandomOrg integrity check trivially matches any non-empty byte string. Any on-path attacker, such as open WiFi, a compromised ISP, captive portal, or a hostile egress proxy substitutes the response and thereby chooses the bytes returned by rand_bits and rand_int for every application that selected one of these sources via with_entropy_source. The _checkbuf method response is equally attacker-controlled, so the retry/sleep behaviour is steerable too. | CVSS3: 7.5 | 0% Низкий | 16 дней назад | |
CVE-2026-18508 A flaw was found in GNU tar. When extracting an archive with the --one-top-level option, hardlink targets are not confined to the designated top-level directory and may resolve relative to the extraction working directory. A crafted archive can create hardlinks that escape the intended boundary and, when combined with a preexisting symbolic link under the working directory, may allow writing outside that boundary during a single extraction. | CVSS3: 4.4 | 0% Низкий | 17 дней назад | |
CVE-2026-18477 A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue. | CVSS3: 4.4 | 0% Низкий | 17 дней назад |
Уязвимостей на страницу