Поиск уязвимостей
Количество 20
Количество 20
CVE-2026-43205
In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...
CVE-2026-43205
In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...
CVE-2026-43205
In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...
CVE-2026-43205
In the Linux kernel, the following vulnerability has been resolved: d ...
GHSA-v2hq-m36p-4jr3
In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...
BDU:2026-11702
Уязвимость компонента drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании
ROS-20260918-80-0010
Уязвимость kernel-lt
ROS-20260918-73-0009
Уязвимость kernel-lt
RLSA-2026:21557
Important: kernel security update
ELSA-2026-21557
ELSA-2026-21557: kernel security update (IMPORTANT)
openSUSE-SU-2026:21388-1
Security update for the Linux Kernel
ALT-PU-2026-7309
ALT-PU-2026-7309: package `kernel-image-pine` update to version 6.18.16-alt1
ALT-PU-2026-4126
ALT-PU-2026-4126: package `kernel-image-un-def` update to version 6.1.166-alt1
SUSE-SU-2026:3166-1
Security update for the Linux Kernel
SUSE-SU-2026:3130-1
Security update for the Linux Kernel
ALT-PU-2026-4865
ALT-PU-2026-4865: package `kernel-image-6.18` update to version 6.18.19-alt1
ALT-PU-2026-6044
ALT-PU-2026-6044: package `kernel-image-rpi-un` update to version 6.12.79-alt1
ALT-PU-2026-7006
ALT-PU-2026-7006: package `kernel-image-6.12` update to version 6.12.85-alt1
ALT-PU-2026-7004
ALT-PU-2026-7004: package `kernel-image-rt` update to version 6.12.85-alt1
ALT-PU-2026-9924
ALT-PU-2026-9924: package `kernel-image-rpi-un` update to version 6.12.94-alt1
Уязвимостей на страницу
Уязвимость | CVSS | EPSS | Опубликовано | |
|---|---|---|---|---|
CVE-2026-43205 In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ... | CVSS3: 7.8 | 0% Низкий | 6 месяцев назад | |
CVE-2026-43205 In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ... | CVSS3: 6.7 | 0% Низкий | 6 месяцев назад | |
CVE-2026-43205 In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ... | CVSS3: 7.8 | 0% Низкий | 6 месяцев назад | |
CVE-2026-43205 In the Linux kernel, the following vulnerability has been resolved: d ... | CVSS3: 7.8 | 0% Низкий | 6 месяцев назад | |
GHSA-v2hq-m36p-4jr3 In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ... | CVSS3: 7.8 | 0% Низкий | 6 месяцев назад | |
BDU:2026-11702 Уязвимость компонента drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании | CVSS3: 7.8 | 0% Низкий | 9 месяцев назад | |
ROS-20260918-80-0010 Уязвимость kernel-lt | CVSS3: 7.8 | 0% Низкий | около 2 месяцев назад | |
ROS-20260918-73-0009 Уязвимость kernel-lt | CVSS3: 7.8 | 0% Низкий | около 2 месяцев назад | |
RLSA-2026:21557 Important: kernel security update | 5 месяцев назад | |||
ELSA-2026-21557 ELSA-2026-21557: kernel security update (IMPORTANT) | 3 месяца назад | |||
openSUSE-SU-2026:21388-1 Security update for the Linux Kernel | 4 месяца назад | |||
ALT-PU-2026-7309 ALT-PU-2026-7309: package `kernel-image-pine` update to version 6.18.16-alt1 | CVSS3: 9.8 | 8 месяцев назад | ||
ALT-PU-2026-4126 ALT-PU-2026-4126: package `kernel-image-un-def` update to version 6.1.166-alt1 | CVSS3: 9.8 | 8 месяцев назад | ||
SUSE-SU-2026:3166-1 Security update for the Linux Kernel | 4 месяца назад | |||
SUSE-SU-2026:3130-1 Security update for the Linux Kernel | 4 месяца назад | |||
ALT-PU-2026-4865 ALT-PU-2026-4865: package `kernel-image-6.18` update to version 6.18.19-alt1 | CVSS3: 9.8 | 7 месяцев назад | ||
ALT-PU-2026-6044 ALT-PU-2026-6044: package `kernel-image-rpi-un` update to version 6.12.79-alt1 | CVSS3: 9.8 | 7 месяцев назад | ||
ALT-PU-2026-7006 ALT-PU-2026-7006: package `kernel-image-6.12` update to version 6.12.85-alt1 | CVSS3: 9.8 | 6 месяцев назад | ||
ALT-PU-2026-7004 ALT-PU-2026-7004: package `kernel-image-rt` update to version 6.12.85-alt1 | CVSS3: 9.8 | 6 месяцев назад | ||
ALT-PU-2026-9924 ALT-PU-2026-9924: package `kernel-image-rpi-un` update to version 6.12.94-alt1 | CVSS3: 10 | 5 месяцев назад |
Уязвимостей на страницу