Поиск уязвимостей

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in tipc_named_node_up() on empty publication list User-space applications can bind a large number of service addresses to one or more sockets. Each binding of a local-scope service address inserts one entry (publication) into the TIPC name table. If the number of these publications exceeds TIPC_MAX_PUBL (65535), protocol service types (such as node state and link state) are no longer inserted into the name table. This causes two issues: 1. User-space applications subscribing to node or link up/down events stop receiving notifications. 2. A NULL pointer dereference can occur: BUG: kernel NULL pointer dereference, address: 00000000000000d0 ... CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full) ... RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221) ... Call Trace: <IRQ> tipc_node_write_unlock (net/tipc/n...

In the Linux kernel, the following vulnerability has been resolved: tipc: Dont send random pad bytes in RESET/ACTIVATE messages The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer. Replace the strcpy(data, l->if_name) with memcpy() so that the pad bytes are actually written (l->if_name[] is zero padded) rather than sending random bytes from the skb to the remote system. Replace two other strcpy() with strscpy().

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH) while skb_network_header() points at the IPv6 header. When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately followed the fixed IPv6 header. If another extension header (such as a Hop-by-Hop options header) precedes the SRH, skb_network_offset() remained negative. This led to two problems: 1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes __skb_flow_dissect() which passes the negative skb_network_offset() to flow dissection, breaking BPF and C flow dissector logic. 2. If forwarded via ip6_forward() or redirected via act_mirred, downstream handlers (like sch_fragment() or neighbour output) pass the negative offset as an unsigned length, triggering OOB memcpy or buffer overflows...

In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header(). syzbot reported BUG() in sock_sendmsg_nosec(). [0] The problem is that tpacket_parse_header() casts user-provided tpacket_hdr.tp_len, which is u32, to int. If the length is larger than INT_MAX, the following condition in tpacket_parse_header() passes, if (unlikely(tp_len > size_max)) and any negative value can be returned to the caller, up to sock_sendmsg_nosec(). The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec(). *(uint64_t*)0x200000000008 = 0xfffffdef; ... syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul); Let's define the local tp_len as u32 in tpacket_parse_header(). [0]: kernel BUG at net/socket.c:803! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full) Hardwar...

In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&pa...

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams.

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close() acp6x_pdm_dma_close() does not free the runtime->private_data buffer allocated in acp6x_pdm_dma_open(). Add the missing kfree.

In the Linux kernel, the following vulnerability has been resolved: btrfs: detach failed sprout device from transaction update list When creating the first metadata chunk for a sprout filesystem, create_chunk() adds the new device to the transaction dev_update_list through device->post_commit_list. If the subsequent system chunk creation fails, btrfs_init_new_device() aborts the transaction and releases the device while post_commit_list is still linked. This triggers a warning in btrfs_free_device() and leaves the transaction list referencing freed memory. Detach the device while holding chunk_mutex before releasing it.

In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switches latest_dev and possibly s_bdev from the seed device to the new sprout device before creating the first writable chunks. If chunk creation or the subsequent sprout setup fails, the error path releases the new device without switching those pointers back. btrfs_show_devname() can then dereference the freed latest_dev and crash. Restore the active device pointers to the latest seed device before removing and releasing the failed sprout device.

In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix uninitialized transport header access in alb_determine_nd() alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers. However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets or forwarded packets), skb->transport_header is not guaranteed to be initialized. While pskb_network_may_pull() ensures the packet data is linear starting from the network header, it does not set or adjust the transport header offset. Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory. Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(), and reload ipv6hdr in case pskb_may_pull() reallocated skb->head. Also remove the unused bond argument from alb_determine_nd().

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index.

In the Linux kernel, the following vulnerability has been resolved: sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate A migrate_disable()'d RT task cannot be moved to another CPU, but the scheduler still keeps such a task on that CPU's pushable list (rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded (rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as having a task to move away, and keeps trying to move the task, but the push can never succeed. When the head is pinned, push_rt_task() does not give up either. It falls back to pushing rq->curr instead, using the per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing"). The CPU spends tens of milliseconds in this retry loop. The core is isolated for real-time work, but during the loop nearly half of its time is consumed by pushes that cannot succeed. An ftrace capture of the affected CPU, with sched_switch enabled and commit 94894c9c477e ...

In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: do not touch legacy_rmidi before it exists snd_ump_parse_endpoint() sets ump->parsed on every exit, including error, before the caller attaches the legacy rawmidi device. ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live" and calls ump_legacy_set_rawmidi_name(), which snprintf()s into ump->legacy_rmidi->name. If a UMP packet arrives in that window (IRQ path from snd_ump_receive), legacy_rmidi is still NULL (KASAN null-ptr-deref in snprintf). Guard the legacy helpers. parsed only means endpoint info was parsed, not that legacy_rmidi exists.

In the Linux kernel, the following vulnerability has been resolved: bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge Nicholas Carlini reported a bug in precision backtracking mechanism for BPF_LD | BPF_{IND,ABS} instructions. These instructions are modelled as two branches: - fallthrough; - implicit exit from current subprogram. The implicit exit case was not handled by the backtrack_insn() function. When backtracking such a path backtrack_insn() did not call bt_subprog_enter(), which meant that backtracking continued manipulating precision marks in a caller frame, while looking at instructions in a callee frame. This lead to segmentation faults during verification (see the selftest), or unsound state pruning.

In the Linux kernel, the following vulnerability has been resolved: bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks When processing calls to bpf_loop() verifier marks R1 (and R4) as precise. R1 tracks loop iterations number and because of the 'callback_depth < R1' mechanics in check_helper_call() must be marked precise. However, precision propagation for R1 was broken, when bpf_loop() call was verified on a second iteration. Consider the following verification trace: - main: bpf_loop(nr_loops, callback ...) - callback: BPF_EXIT - main: bpf_loop(nr_loops, callback ...) - ... While the first visit of the call to bpf_loop() propagated R1 precision as expected, the second call to mark_chain_precision() in the check_helper_call() set R1, but it was immediately reset when backtrack_insn() processed preceding BPF_EXIT in the loop deleted in this patch. Because of that, the second visit of the call to bpf_loop() injected checkpoint with R1 not marked as precise. Which coul...

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID stripe extent fails, btrfs_insert_one_raid_extent() aborts and ends the transaction before returning -ENOMEM. btrfs_finish_one_ordered(), the production caller through btrfs_insert_raid_extent(), still owns the transaction handle. It handles the error by aborting the transaction and then reaches the common exit path, which ends the transaction again. The premature end can free the handle and drop its transaction reference. Transaction cleanup can then free the transaction before the caller's second abort accesses the handle and transaction, resulting in use-after-free. Keep the abort at the failure site, but let the caller's common exit path end the transaction once, after it has finished using both objects.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the possible bioc_list memory leak during error There are two possible ways to leak bioc memory on btrfs_ordered_extent::bioc_list: - An error occurred for btrfs_insert_one_raid_extent() Then the function btrfs_insert_raid_extent() immediately return without freeing any bioc in the bioc_list. - An ordered extent hit an IO error In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and skip the call on btrfs_insert_raid_extent() completely. Fix the problem by: - Introduce a new helper, btrfs_cleanup_ordered_bioc_list() Which will remove all bioc from the bioc_list, and release the bioc. - Call the above helper for btrfs_insert_raid_extent() So that the cleanup helper is always called no matter what. - Call the above helper for btrfs_finish_one_ordered() This is called just before the final release on the ordered extent. This was reported by Sashiko when reviewing another patch.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: finish active block group cleanup if call_zone_finish() fails do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing the zones. If call_zone_finish() then fails it returned early, leaving the now inactive block group on fs_info->zone_active_bgs, leaking its reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps selecting it, spinning btrfs_zoned_activate_one_bg(). Fall through to the cleanup on failure too and return the error, but keep the block group read-only as its zones are left inconsistent.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not force reloc root creation during qgroup_account_snapshot() [BUG] When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota", it has a high chance to trigger the following kernel warning and flips the fs RO: BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup ------------[ cut here ]------------ WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173 CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe1095385818e742f200aab Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:lookup_inline_extent_backref+0x74b/0x960 [btrfs] Call Trace: <TASK> insert_inline_extent_backref+0x7c/0x160 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_inc_extent_ref+0xa9/0x270 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_run_delayed...

In the Linux kernel, the following vulnerability has been resolved: btrfs: zstd: fix lost wakeup when waiting for a workspace A writer can sleep forever in zstd_get_workspace() even though a workspace is free. When zstd_alloc_workspace() fails, the task is queued on zwsm->wait and schedules unconditionally, never re-testing the pool. zstd_put_workspace() publishes the workspace and then calls cond_wake_up(), which only wakes when a sleeper is already visible, so a workspace returned between the failed allocation and prepare_to_wait() wakes nobody. The window is wide: zstd_alloc_workspace() goes through kvmalloc() and may enter reclaim. Only a max level workspace triggers the wakeup and one is deliberately kept allocated as the fallback every waiter waits for, so once its wakeup is lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens to return one. Re-check the pool after prepare_to_wait() has published the waiter, and use the workspace if one turned up.