In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback This patch addresses below issues, 1. Active traffic on the leaf node must be stopped before its send queue is reassigned to the parent. This patch resolves the issue by marking the node as 'Inner'. 2. During a system reboot, the interface receives TC_HTB_LEAF_DEL and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues. In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue is reassigned to the parent, the current logic still attempts to update the real number of queues, leadning to below warnings New queues can't be registered after device unregistration. WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714 netdev_queue_update_kobjects+0x1e4/0x200

In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: fs/dax: Fix "don't skip locked entries when scanning entries" Commit 6be3e21d25ca ("fs/dax: don't skip locked entries when scanning entries") introduced a new function, wait_entry_unlocked_exclusive(), which waits for the current entry to become unlocked without advancing the XArray iterator state. Waiting for the entry to become unlocked requires dropping the XArray lock. This requires calling xas_pause() prior to dropping the lock which leaves the xas in a suitable state for the next iteration. However this has the side-effect of advancing the xas state to the next index. Normally this isn't an issue because xas_for_each() contains code to detect this state and thus avoid advancing the index a second time on the next loop iteration. However both callers of and wait_entry_unlocked_exclusive() itself subsequently use the xas state to reload the entry. As xas_pause() updated the state to the next index this will caus...

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM), ensuring safe and consistent error handling.

In the Linux kernel, the following vulnerability has been resolved: fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt() fpga_mgr_test_img_load_sgt() allocates memory for sgt using kunit_kzalloc() however it does not check if the allocation failed. It then passes sgt to sg_alloc_table(), which passes it to __sg_alloc_table(). This function calls memset() on sgt in an attempt to zero it out. If the allocation fails then sgt will be NULL and the memset will trigger a NULL pointer dereference. Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().

In the Linux kernel, the following vulnerability has been resolved: net: tipc: fix refcount warning in tipc_aead_encrypt syzbot reported a refcount warning [1] caused by calling get_net() on a network namespace that is being destroyed (refcount=0). This happens when a TIPC discovery timer fires during network namespace cleanup. The recently added get_net() call in commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to hold a reference to the network namespace. However, if the namespace is already being destroyed, its refcount might be zero, leading to the use-after-free warning. Replace get_net() with maybe_get_net(), which safely checks if the refcount is non-zero before incrementing it. If the namespace is being destroyed, return -ENODEV early, after releasing the bearer reference. [1]: https://lore.kernel.org/all/68342b55.a70a0220.253bc2.0091.GAE@google.com/T/#m12019cf9ae77e1954f666914640efa36d52704a2

In the Linux kernel, the following vulnerability has been resolved: net: dsa: b53: do not enable EEE on bcm63xx BCM63xx internal switches do not support EEE, but provide multiple RGMII ports where external PHYs may be connected. If one of these PHYs are EEE capable, we may try to enable EEE for the MACs, which then hangs the system on access of the (non-existent) EEE registers. Fix this by checking if the switch actually supports EEE before attempting to configure it.

In the Linux kernel, the following vulnerability has been resolved: net: prevent a NULL deref in rtnl_create_link() At the time rtnl_create_link() is running, dev->netdev_ops is NULL, we must not use netdev_lock_ops() or risk a NULL deref if CONFIG_NET_SHAPER is defined. Use netif_set_group() instead of dev_set_group(). RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline] RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82 Call Trace: <TASK> rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674 rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813 __rtnl_newlink net/core/rtnetlink.c:3940 [inline] rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339 netlink_sendmsg+...

In the Linux kernel, the following vulnerability has been resolved: net: drv: netdevsim: don't napi_complete() from netpoll netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely.

In the Linux kernel, the following vulnerability has been resolved: btrfs: exit after state insertion failure at btrfs_convert_extent_bit() If insert_state() state failed it returns an error pointer and we call extent_io_tree_panic() which will trigger a BUG() call. However if CONFIG_BUG is disabled, which is an uncommon and exotic scenario, then we fallthrough and call cache_state() which will dereference the error pointer, resulting in an invalid memory access. So jump to the 'out' label after calling extent_io_tree_panic(), it also makes the code more clear besides dealing with the exotic scenario where CONFIG_BUG is disabled.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: move tcpm_queue_vdm_unlocked to asynchronous work A state check was previously added to tcpm_queue_vdm_unlocked to prevent a deadlock where the DisplayPort Alt Mode driver would be executing work and attempting to grab the tcpm_lock while the TCPM was holding the lock and attempting to unregister the altmode, blocking on the altmode driver's cancel_work_sync call. Because the state check isn't protected, there is a small window where the Alt Mode driver could determine that the TCPM is in a ready state and attempt to grab the lock while the TCPM grabs the lock and changes the TCPM state to one that causes the deadlock. The callstack is provided below: [110121.667392][ C7] Call trace: [110121.667396][ C7] __switch_to+0x174/0x338 [110121.667406][ C7] __schedule+0x608/0x9f0 [110121.667414][ C7] schedule+0x7c/0xe8 [110121.667423][ C7] kernfs_drain+0xb0/0x114 [110121.667431][ C7] ...

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not trigger WARN_ON() due to a commit_overrun When reading a memory mapped buffer the reader page is just swapped out with the last page written in the write buffer. If the reader page is the same as the commit buffer (the buffer that is currently being written to) it was assumed that it should never have missed events. If it does, it triggers a WARN_ON_ONCE(). But there just happens to be one scenario where this can legitimately happen. That is on a commit_overrun. A commit overrun is when an interrupt preempts an event being written to the buffer and then the interrupt adds so many new events that it fills and wraps the buffer back to the commit. Any new events would then be dropped and be reported as "missed_events". In this case, the next page to read is the commit buffer and after the swap of the reader page, the reader page will be the commit buffer, but this time there will be missed events an...

In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms Commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") introduced an access to the 'soc' field of struct mtk_pinctrl in mtk_eint_do_init() and for that an include of pinctrl-mtk-common-v2.h. However, pinctrl drivers relying on the v1 common driver include pinctrl-mtk-common.h instead, which provides another definition of struct mtk_pinctrl that does not contain an 'soc' field. Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it will now try to dereference an invalid pointer when called on v1 platforms. This has been observed on Genio 350 EVK (MT8365), which crashes very early in boot (the kernel trace can only be seen with earlycon). In order to fix this, since 'struct mtk_pinctrl' was only needed to get a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter of mtk_eint_do_init() so that ca...

In the Linux kernel, the following vulnerability has been resolved: serial: jsm: fix NPE during jsm_uart_port_init No device was set which caused serial_base_ctrl_add to crash. BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1 RIP: 0010:serial_base_ctrl_add+0x96/0x120 Call Trace: <TASK> serial_core_register_port+0x1a0/0x580 ? __setup_irq+0x39c/0x660 ? __kmalloc_cache_noprof+0x111/0x310 jsm_uart_port_init+0xe8/0x180 [jsm] jsm_probe_one+0x1f4/0x410 [jsm] local_pci_probe+0x42/0x90 pci_device_probe+0x22f/0x270 really_probe+0xdb/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8c/0xe0 bus_add_driver+0x112/0x1f0 driver_register+0x72/0xd0 jsm_init_module+0x36/0xff0 [jsm] ? __pfx_jsm_init_module+0x10/0x10 [jsm] do_one_i...

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: sanitize request list handling Validate the request in nvme_tcp_handle_r2t() to ensure it's not part of any list, otherwise a malicious R2T PDU might inject a loop in request list processing.

In the Linux kernel, the following vulnerability has been resolved: bcache: fix NULL pointer in cache_set_flush() 1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER...

In the Linux kernel, the following vulnerability has been resolved: tty: serial: uartlite: register uart driver in init When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0...

In the Linux kernel, the following vulnerability has been resolved: riscv: save the SR_SUM status over switches When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : fff...

In the Linux kernel, the following vulnerability has been resolved: btrfs: handle csum tree error with rescue=ibadroots correctly [BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1...

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9335: Fix missing free of regulator supplies Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code.