In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs [Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size < 36. Fix both issues by: - Returning -ENODEV when connector->base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300)

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: fix stale stack leak via the OIFNAME register For NFT_FIB_RESULT_OIFNAME the destination register is declared with len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail, RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one register via "*dest = 0". The remaining three registers are left as whatever was on the stack in nft_do_chain()'s struct nft_regs, and a downstream expression that loads the register span can leak that uninitialised kernel stack to userspace. The NFTA_FIB_F_PRESENT existence check has the same shape: it is only meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type while the eval stores a single byte via nft_reg_store8(), leaving the rest of the declared span stale. Fix both: - replace the bare "*dest = 0" in the eval with nft_fib_store_result(), which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already used on the other ea...

In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix truncation for block sizes >= 4G When the iommu is used the linearization of the mapping can give a single block that is very large split across multiple SG entries. When __rdma_block_iter_next() reassembles the split SG entries it is overflowing the 32 bit stack values and computed the wrong DMA addresses for blocks after the truncation. Use the right types to hold DMA addresses.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential unbounded skb queue virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc. virtio_transport_recv_enqueue() skips coalescing for packets with VIRTIO_VSOCK_SEQ_EOM. If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM, a very large number of packets can be queued because vvs->rx_bytes stays at 0. Fix this by estimating the skb metadata size: (Number of skbs in the queue) * SKB_TRUESIZE(0)

In the Linux kernel, the following vulnerability has been resolved: netfilter: require Ethernet MAC header before using eth_hdr() `ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and `hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)` after either assuming that the skb is associated with an Ethernet device or checking only that the `ETH_HLEN` bytes at `skb_mac_header(skb)` lie between `skb->head` and `skb->data`. Make these paths first verify that the skb is associated with an Ethernet device, that the MAC header was set, and that it spans at least a full Ethernet header before accessing `eth_hdr(skb)`.

In the Linux kernel, the following vulnerability has been resolved: fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START omfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE), but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440). Later, omfs_make_empty() uses sbi->s_sys_blocksize - OMFS_DIR_START as the length argument to memset(). Since s_sys_blocksize is u32, a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causes an unsigned underflow there, wrapping to a value near 2^32. That drives a ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernel memory far beyond the backing block buffer. Add the corresponding lower-bound check alongside the existing upper-bound check in omfs_fill_super(), so that malformed images are rejected during superblock validation before any filesystem data is processed.

In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down.

In the Linux kernel, the following vulnerability has been resolved: drbd: Balance RCU calls in drbd_adm_dump_devices() Make drbd_adm_dump_devices() call rcu_read_lock() before rcu_read_unlock() is called. This has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: block: fix zones_cond memory leak on zone revalidation error paths When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources() has allocated args.zones_cond, the memory is leaked because no error path frees it.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix disk reference leak in blkcg_maybe_throttle_current() Add the missing put_disk() on the error path in blkcg_maybe_throttle_current(). When blkcg lookup, blkg lookup, or blkg_tryget() fails, the function jumps to the out label which only calls rcu_read_unlock() but does not release the disk reference acquired by blkcg_schedule_throttle() via get_device(). Since current->throttle_disk is already set to NULL before the lookup, blkcg_exit() cannot release this reference either, causing the disk to never be freed. Restore the reference release that was present as blk_put_queue() in the original code but was inadvertently dropped during the conversion from request_queue to gendisk.

In the Linux kernel, the following vulnerability has been resolved: md: fix array_state=clear sysfs deadlock When "clear" is written to array_state, md_attr_store() breaks sysfs active protection so the array can delete itself from its own sysfs store method. However, md_attr_store() currently drops the mddev reference before calling sysfs_unbreak_active_protection(). Once do_md_stop(..., 0) has made the mddev eligible for delayed deletion, the temporary kobject reference taken by sysfs_break_active_protection() can become the last kobject reference protecting the md kobject. That allows sysfs_unbreak_active_protection() to drop the last kobject reference from the current sysfs writer context. kobject teardown then recurses into kernfs removal while the current sysfs node is still being unwound, and lockdep reports recursive locking on kn->active with kernfs_drain() in the call chain. Reproducer on an existing level: 1. Create an md0 linear array and activate it: mknod /dev/md0 b 9 ...

In the Linux kernel, the following vulnerability has been resolved: ublk: reset per-IO canceled flag on each fetch If a ublk server starts recovering devices but dies before issuing fetch commands for all IOs, cancellation of the fetch commands that were successfully issued may never complete. This is because the per-IO canceled flag can remain set even after the fetch for that IO has been submitted - the per-IO canceled flags for all IOs in a queue are reset together only once all IOs for that queue have been fetched. So if a nonempty proper subset of the IOs for a queue are fetched when the ublk server dies, the IOs in that subset will never successfully be canceled, as their canceled flags remain set, and this prevents ublk_cancel_cmd from actually calling io_uring_cmd_done on the commands, despite the fact that they are outstanding. Fix this by resetting the per-IO cancel flags immediately when each IO is fetched instead of waiting for all IOs for the queue (which may never happ...

In the Linux kernel, the following vulnerability has been resolved: md: wake raid456 reshape waiters before suspend During raid456 reshape, direct IO across the reshape position can sleep in raid5_make_request() waiting for reshape progress while still holding an active_io reference. If userspace then freezes reshape and writes md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_io and waits for all in-flight IO to drain. This can deadlock: the IO needs reshape progress to continue, but the reshape thread is already frozen, so the active_io reference is never dropped and suspend never completes. raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Do the same for normal md suspend when reshape is already interrupted, so waiting raid456 IO can abort, drop its reference, and let suspend finish. The mdadm test tests/25raid456-reshape-deadlock reproduces the hang.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between reflink and transaction commit when using flushoncommit When using the flushoncommit mount option, we can have a deadlock between a transaction commit and a reflink operation that copied an inline extent to an offset beyond the current i_size of the destination node. The deadlock happens like this: 1) Task A clones an inline extent from inode X to an offset of inode Y that is beyond Y's current i_size. This means we copied the inline extent's data to a folio of inode Y that is beyond its EOF, using a call to copy_inline_to_page(); 2) Task B starts a transaction commit and calls btrfs_start_delalloc_flush() to flush delalloc; 3) The delalloc flushing sees the new dirty folio of inode Y and when it attempts to flush it, it ends up at extent_writepage() and sees that the offset of the folio is beyond the i_size of inode Y, so it attempts to invalidate the folio by calling folio_invalidate(),...

In the Linux kernel, the following vulnerability has been resolved: amd-pstate: Fix memory leak in amd_pstate_epp_cpu_init() On failure to set the epp, the function amd_pstate_epp_cpu_init() returns with an error code without freeing the cpudata object that was allocated at the beginning of the function. Ensure that the cpudata object is freed before returning from the function. This memory leak was discovered by Claude Opus 4.6 with the aid of Chris Mason's AI review-prompts (https://github.com/masoncl/review-prompts/tree/main/kernel).

In the Linux kernel, the following vulnerability has been resolved: PCI: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: platform/wmi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: vdpa: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: s390/cio: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: s390/ap: use generic driver_override infrastructure When the AP masks are updated via apmask_store() or aqmask_store(), ap_bus_revise_bindings() is called after ap_attr_mutex has been released. This calls __ap_revise_reserved(), which accesses the driver_override field without holding any lock, racing against a concurrent driver_override_store() that may free the old string, resulting in a potential UAF. Fix this by using the driver-core driver_override infrastructure, which protects all accesses with an internal spinlock. Note that unlike most other buses, the AP bus does not check driver_override in its match() callback; the override is checked in ap_device_probe() and __ap_revise_reserved() instead. Also note that we do not enable the driver_override feature of struct bus_type, as AP - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead...