In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to alloc...

In the Linux kernel, the following vulnerability has been resolved: mm: Fix a hmm_range_fault() livelock / starvation problem If hmm_range_fault() fails a folio_trylock() in do_swap_page, trying to acquire the lock of a device-private folio for migration, to ram, the function will spin until it succeeds grabbing the lock. However, if the process holding the lock is depending on a work item to be completed, which is scheduled on the same CPU as the spinning hmm_range_fault(), that work item might be starved and we end up in a livelock / starvation situation which is never resolved. This can happen, for example if the process holding the device-private folio lock is stuck in migrate_device_unmap()->lru_add_drain_all() sinc lru_add_drain_all() requires a short work-item to be run on all online cpus to complete. A prerequisite for this to happen is: a) Both zone device and system memory folios are considered in migrate_device_unmap(), so that there is a reason to call lru_add_drain_all(...

In the Linux kernel, the following vulnerability has been resolved: nsfs: tighten permission checks for ns iteration ioctls Even privileged services should not necessarily be able to see other privileged service's namespaces so they can't leak information to each other. Use may_see_all_namespaces() helper that centralizes this policy until the nstree adapts.

In the Linux kernel, the following vulnerability has been resolved: kthread: consolidate kthread exit paths to prevent use-after-free Guillaume reported crashes via corrupted RCU callback function pointers during KUnit testing. The crash was traced back to the pidfs rhashtable conversion which replaced the 24-byte rb_node with an 8-byte rhash_head in struct pid, shrinking it from 160 to 144 bytes. struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to 192 bytes and share the same slab cache. struct pid.rcu.func and struct kthread.affinity_node both sit at offset 0x78. When a kthread exits via make_task_dead() it bypasses kthread_exit() and misses the affinity_node cleanup. free_kthread_struct() frees the memory while the node is still linked into the global kthread_affinity_list. A subsequent list_del() by another kthread writes through dangling list pointers into the freed and reused memory, corrupting th...

In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request() The update_cpu_qos_request() function attempts to initialize the 'freq' variable by dereferencing 'cpudata' before verifying if the 'policy' is valid. This issue occurs on systems booted with the "nosmt" parameter, where all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result, any call to update_qos_requests() will result in a NULL pointer dereference as the code will attempt to access pstate.turbo_freq using the NULL cpudata pointer. Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap() after initializing the 'freq' variable, so it is better to defer the 'freq' until intel_pstate_get_hwp_cap() has been called. Fix this by deferring the 'freq' assignment until after the policy and driver_data have been validated. [ rjw: Added one paragraph to the changelog ]

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in signal ioctl Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. (cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl Drop reference to syncobj and timeline fence when aborting the ioctl due output array being too small. (cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in wait ioctl Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. v2: squash in Srini's fix (cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476)

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: Fix memory leak in error path In samsung_dsim_host_attach(), drm_bridge_add() is called to add the bridge. However, if samsung_dsim_register_te_irq() or pdata->host_ops->attach() fails afterwards, the function returns without removing the bridge, causing a memory leak. Fix this by adding proper error handling with goto labels to ensure drm_bridge_remove() is called in all error paths. Also ensure that samsung_dsim_unregister_te_irq() is called if the attach operation fails after the TE IRQ has been registered. samsung_dsim_unregister_te_irq() function is moved without changes to be before samsung_dsim_host_attach() to avoid forward declaration.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/sync: Fix user fence leak on alloc failure When dma_fence_chain_alloc() fails, properly release the user fence reference to prevent a memory leak. (cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0)

In the Linux kernel, the following vulnerability has been resolved: drm/xe/sync: Cleanup partially initialized sync on parse failure xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence, or user fence) before hitting a later failure path. Several of those paths returned directly, leaving partially initialized state and leaking refs. Route these error paths through a common free_sync label and call xe_sync_entry_cleanup(sync) before returning the error. (cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22)

In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit(). nfsd_nl_listener_set_doit() uses get_current_cred() without put_cred(). As we can see from other callers, svc_xprt_create_from_sa() does not require the extra refcount. nfsd_nl_listener_set_doit() is always in the process context, sendmsg(), and current->cred does not go away. Let's use current_cred() in nfsd_nl_listener_set_doit().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies() Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL, we're not freeing the chunk map that we've just looked up.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix starvation of scx_enable() under fair-class saturation During scx_enable(), the READY -> ENABLED task switching loop changes the calling thread's sched_class from fair to ext. Since fair has higher priority than ext, saturating fair-class workloads can indefinitely starve the enable thread, hanging the system. This was introduced when the enable path switched from preempt_disable() to scx_bypass() which doesn't protect against fair-class starvation. Note that the original preempt_disable() protection wasn't complete either - in partial switch modes, the calling thread could still be starved after preempt_enable() as it may have been switched to ext class. Fix it by offloading the enable body to a dedicated system-wide RT (SCHED_FIFO) kthread which cannot be starved by either fair or ext class tasks. scx_enable() lazily creates the kthread on first use and passes the ops pointer through a struct scx_en...

In the Linux kernel, the following vulnerability has been resolved: nsfs: tighten permission checks for handle opening Even privileged services should not necessarily be able to see other privileged service's namespaces so they can't leak information to each other. Use may_see_all_namespaces() helper that centralizes this policy until the nstree adapts.

In the Linux kernel, the following vulnerability has been resolved: nstree: tighten permission checks for listing Even privileged services should not necessarily be able to see other privileged service's namespaces so they can't leak information to each other. Use may_see_all_namespaces() helper that centralizes this policy until the nstree adapts.

In the Linux kernel, the following vulnerability has been resolved: mm: memfd_luo: always dirty all folios A dirty folio is one which has been written to. A clean folio is its opposite. Since a clean folio has no user data, it can be freed under memory pressure. memfd preservation with LUO saves the flag at preserve(). This is problematic. The folio might get dirtied later. Saving it at freeze() also doesn't work, since the dirty bit from PTE is normally synced at unmap and there might still be mappings of the file at freeze(). To see why this is a problem, say a folio is clean at preserve, but gets dirtied later. The serialized state of the folio will mark it as clean. After retrieve, the next kernel will see the folio as clean and might try to reclaim it under memory pressure. This will result in losing user data. Mark all folios of the file as dirty, and always set the MEMFD_LUO_FOLIO_DIRTY flag. This comes with the side effect of making all clean folios un-reclaimable. ...

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: clear walk_control on inactive context in damos_walk() damos_walk() sets ctx->walk_control to the caller-provided control structure before checking whether the context is running. If the context is inactive (damon_is_running() returns false), the function returns -EINVAL without clearing ctx->walk_control. This leaves a dangling pointer to a stack-allocated structure that will be freed when the caller returns. This is structurally identical to the bug fixed in commit f9132fbc2e83 ("mm/damon/core: remove call_control in inactive contexts") for damon_call(), which had the same pattern of linking a control object and returning an error without unlinking it. The dangling walk_control pointer can cause: 1. Use-after-free if the context is later started and kdamond    dereferences ctx->walk_control (e.g., in damos_walk_cancel()    which writes to control->canceled and calls complete()) 2. Permanent -E...

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser"), we don't trust the data in the frame so we should check the length better before acting on it

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.