In the Linux kernel, the following vulnerability has been resolved: memblock: make memblock_set_node() also warn about use of MAX_NUMNODES On an (old) x86 system with SRAT just covering space above 4Gb: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug the commit referenced below leads to this NUMA configuration no longer being refused by a CONFIG_NUMA=y kernel (previously NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used. No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000027fffffff] was seen in the log directly after the message quoted above), because of memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES triggering, followed by a NULL deref in memmap_init() when trying to access node 64's (NODE_SHIFT=6) node data. To compensate said change, make memblock_set_node() warn on and adjust a passed in value of MAX_NUMNODES, just like various o...

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found When reading EDID fails and driver reports no modes available, the DRM core adds an artificial 1024x786 mode to the connector. Unfortunately some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not able to drive such mode, so report a safe 640x480 mode instead of nothing in case of the EDID reading failure. This fixes the following issue observed on Trats2 board since commit 13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"): [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b) exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_...

In the Linux kernel, the following vulnerability has been resolved: riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context __kernel_map_pages() is a debug function which clears the valid bit in page table entry for deallocated pages to detect illegal memory accesses to freed pages. This function set/clear the valid bit using __set_memory(). __set_memory() acquires init_mm's semaphore, and this operation may sleep. This is problematic, because __kernel_map_pages() can be called in atomic context, and thus is illegal to sleep. An example warning that this causes: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd preempt_count: 2, expected: 0 CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff800060dc>] dump_backtrace+0x1c/0x24 [<ffffffff8091ef6e>] show_stack+0x2c/0x38 [<ffffffff8092baf8>] dum...

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: don't unpoison huge_zero_folio When I did memory failure tests recently, below panic occurs: kernel BUG at include/linux/mm.h:1135! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14 RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0 RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246 RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0 RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492 R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00 FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0 Call Trace: <TASK> do_shrink_slab+0x14f...

In the Linux kernel, the following vulnerability has been resolved: cachefiles: defer exposing anon_fd until after copy_to_user() succeeds After installing the anonymous fd, we can now see it in userland and close it. However, at this point we may not have gotten the reference count of the cache, but we will put it during colse fd, so this may cause a cache UAF. So grab the cache reference count before fd_install(). In addition, by kernel convention, fd is taken over by the user land after fd_install(), and the kernel should not call close_fd() after that, i.e., it should call fd_install() after everything is ready, thus fd_install() is called after copy_to_user() succeeds.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup() The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin...

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Lock wiphy in cfg80211_get_station Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dir...

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount imbalance on inbound connections When releasing a socket in ax25_release(), we call netdev_put() to decrease the refcount on the associated ax.25 device. However, the execution path for accepting an incoming connection never calls netdev_hold(). This imbalance leads to refcount errors, and ultimately to kernel crashes. A typical call trace for the above situation will start with one of the following errors: refcount_t: decrement hit 0; leaking memory. refcount_t: underflow; use-after-free. And will then have a trace like: Call Trace: <TASK> ? show_regs+0x64/0x70 ? __warn+0x83/0x120 ? refcount_warn_saturate+0xb2/0x100 ? report_bug+0x158/0x190 ? prb_read_valid+0x20/0x30 ? handle_bug+0x3e/0x70 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? refcount_warn_saturate+0xb2/0x100 ? refcount_warn_saturate+0xb2/0x100 ax25_release+0x2ad/0x360 __sock_release+0x35/0xa0 sock_close+0x19/0x20 [...] On ...

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a potential use-after-free in bpf_link_free() After commit 1a80dbcb2dba, bpf_link can be freed by link->ops->dealloc_deferred, but the code still tests and uses link->ops->dealloc afterward, which leads to a use-after-free as reported by syzbot. Actually, one of them should be sufficient, so just call one of them instead of both. Also add a WARN_ON() in case of any problematic implementation.

In the Linux kernel, the following vulnerability has been resolved: bpf: Set run context for rawtp test_run callback syzbot reported crash when rawtp program executed through the test_run interface calls bpf_get_attach_cookie helper or any other helper that touches task->bpf_ctx pointer. Setting the run context (task->bpf_ctx pointer) for test_run callback.

In the Linux kernel, the following vulnerability has been resolved: ionic: fix kernel panic in XDP_TX action In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ...

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always stop health timer during driver removal Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca faile...

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible race in __fib6_drop_pcpu_from() syzbot found a race in __fib6_drop_pcpu_from() [1] If compiler reads more than once (*ppcpu_rt), second read could read NULL, if another cpu clears the value in rt6_get_pcpu_route(). Add a READ_ONCE() to prevent this race. Also add rcu_read_lock()/rcu_read_unlock() because we rely on RCU protection while dereferencing pcpu_rt. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 7543 Comm: kworker/u8:17 Not tainted 6.10.0-rc1-syzkaller-00013-g2bfcfd584ff5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Workqueue: netns cleanup_net RIP: 0010:__fib6_drop_pcpu_from.part.0+0x10a/0x370 net/ipv6/ip6_fib.c:984 Code: f8 48 c1 e8 03 80 3c 28 00 0f 85 16 02 00 00 4d 8b 3f 4d 85 ff ...

In the Linux kernel, the following vulnerability has been resolved: USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/print...

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps There could be a potential use-after-free case in tcpm_register_source_caps(). This could happen when: * new (say invalid) source caps are advertised * the existing source caps are unregistered * tcpm_register_source_caps() returns with an error as usb_power_delivery_register_capabilities() fails This causes port->partner_source_caps to hold on to the now freed source caps. Reset port->partner_source_caps value to NULL after unregistering existing source caps.

In the Linux kernel, the following vulnerability has been resolved: jfs: xattr: fix buffer overflow for invalid xattr When an xattr size is not what is expected, it is printed out to the kernel log in hex format as a form of debugging. But when that xattr size is bigger than the expected size, printing it out can cause an access off the end of the buffer. Fix this all up by properly restricting the size of the debug hex dump in the kernel log.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory There is a potential out-of-bounds access when using test_bit() on a single word. The test_bit() and set_bit() functions operate on long values, and when testing or setting a single word, they can exceed the word boundary. KASAN detects this issue and produces a dump: BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965 For full log, please look at [1]. Make the allocation at least the size of sizeof(unsigned long) so that set_bit() and test_bit() have sufficient room for read/write operations without overwriting unallocated memory. [1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/

In the Linux kernel, the following vulnerability has been resolved: cachefiles: remove requests from xarray during flushing requests Even with CACHEFILES_DEAD set, we can still read the requests, so in the following concurrency the request may be used after it has been freed: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_ondemand_init_object cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read // close dev fd cachefiles_flush_reqs complete(&REQ_A->done) kfree(REQ_A) xa_lock(&cache->reqs); cachefiles_ondemand_select_req req->msg.opcode != CACHEFILES_OP_READ // req use-after-free !!! xa_unlock(&cache->reqs); xa_destroy(&cache->reqs) Hence remove requests from cache->reqs when flushing them to avoid accessing freed requests.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd() We got the following issue in a fuzz test of randomly issuing the restore command: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0x609/0xab0 Write of size 4 at addr ffff888109164a80 by task ondemand-04-dae/4962 CPU: 11 PID: 4962 Comm: ondemand-04-dae Not tainted 6.8.0-rc7-dirty #542 Call Trace: kasan_report+0x94/0xc0 cachefiles_ondemand_daemon_read+0x609/0xab0 vfs_read+0x169/0xb50 ksys_read+0xf5/0x1e0 Allocated by task 626: __kmalloc+0x1df/0x4b0 cachefiles_ondemand_send_req+0x24d/0x690 cachefiles_create_tmpfile+0x249/0xb30 cachefiles_create_file+0x6f/0x140 cachefiles_look_up_object+0x29c/0xa60 cachefiles_lookup_cookie+0x37d/0xca0 fscache_cookie_state_machine+0x43c/0x1230 [...] Freed by task 626: kfree+0xf1/0x2c0 cachefiles_ondemand_send_req+0x568/0x690 cachefiles...

SSRF in Apache HTTP Server on Windows with mod_rewrite in server/vhost context, allows to potentially leak NTML hashes to a malicious server via SSRF and malicious requests. Users are recommended to upgrade to version 2.4.62 which fixes this issue.