An out-of-bounds read might happen when SetMacAddrAction is used, potentially resulting in uninitialized memory being sent over the network or a crash.

An attacker might be able to cause outgoing TCP connections to backend to be stuck until a timeout occurs instead of being released immediately, by sending IXFR queries. This could be used to cause a denial of service if there is a limit to the number of concurrent connections to this backend, or if the process runs out of file descriptors.

An attacker might be able to delay the processing of DoH3 queries by sending DoH3 GET queries with an invalid DATA frame.

An attacker that holds an OAuth2 token granting only part of the required scopes can authenticate, because when more than one scope is required in the configuration, the remote token validation paths accept a token that carries only one of them, while the local token validation path correctly requires all of them. The configured authorization policy is not enforced, so a token that was granted only part of the required permissions is accepted where it should have been rejected. Use local token validation where tokens can be validated locally. Update to non-vulnerable version. No publicly available exploits are known.

None None None No publicly available exploits are known.

When IMAP compression is enabled, the same compression state is reused across responses in a session, so response sizes depend on both attacker-supplied mail and other mail in the same mailbox. An attacker that can send mail to a user and can also observe the sizes of that user's IMAP traffic can confirm whether the body of a small message matches a guessed text. Recovery of arbitrary unknown content was not demonstrated, but the attack can disclose whether a secret-like message body matches a candidate. Disable IMAP compression. Update to non-vulnerable version. No publicly available exploits are known.

An issue was discovered in musl libc 0.7.10 through 1.2.6. Stack-based memory corruption can occur during qsort of very large arrays, due to incorrectly implemented double-word primitives. The number of elements must exceed about seven million, i.e., the 32nd Leonardo number on 32-bit platforms (or the 64th Leonardo number on 64-bit platforms, which is not practical).

Net::CIDR::Lite versions before 0.23 for Perl mishandles IPv4 mapped IPv6 addresses, which may allow IP ACL bypass. _pack_ipv6() includes the sentinel byte from _pack_ipv4() when building the packed representation of IPv4 mapped addresses like ::ffff:192.168.1.1. This produces an 18 byte value instead of 17 bytes, misaligning the IPv4 part of the address. The wrong length causes incorrect results in mask operations (bitwise AND truncates to the shorter operand) and in find() / bin_find() which use Perl string comparison (lt/gt). This can cause find() to incorrectly match or miss addresses. Example: my $cidr = Net::CIDR::Lite->new("::ffff:192.168.1.0/120"); $cidr->find("::ffff:192.168.2.0"); # incorrectly returns true This is triggered by valid RFC 4291 IPv4 mapped addresses (::ffff:x.x.x.x). See also CVE-2026-40198, a related issue in the same function affecting malformed IPv6 addresses.

Net::CIDR::Lite versions before 0.23 for Perl does not validate IPv6 group count, which may allow IP ACL bypass. _pack_ipv6() does not check that uncompressed IPv6 addresses (without ::) have exactly 8 hex groups. Inputs like "abcd", "1:2:3", or "1:2:3:4:5:6:7" are accepted and produce packed values of wrong length (3, 7, or 15 bytes instead of 17). The packed values are used internally for mask and comparison operations. find() and bin_find() use Perl string comparison (lt/gt) on these values, and comparing strings of different lengths gives wrong results. This can cause find() to incorrectly report an address as inside or outside a range. Example: my $cidr = Net::CIDR::Lite->new("::/8"); $cidr->find("1:2:3"); # invalid input, incorrectly returns true This is the same class of input validation issue as CVE-2021-47154 (IPv4 leading zeros) previously fixed in this module. See also CVE-2026-40199, a related issue in the same function affecting IPv4 mapped IPv6 addresses.

Incus is a system container and virtual machine manager. In versions before 7.0.0, missing validation logic in the storage volume import logic allows an authenticated user with access to the storage volume feature to cause the Incus daemon to crash. The custom volume backup import subsystem contains a nil-pointer dereference vulnerability during import operations. In the snapshot import loop, the daemon iterates over entries from `srcBackup.Config.VolumeSnapshots` and assumes that each slice element is initialized, then dereferences fields such as `Name`, `Config`, `Description`, `CreatedAt`, and `ExpiresAt` without first validating the element itself. Because the yaml unmarshaler accepts explicit null array elements from an attacker-controlled index.yaml and converts them into nil pointers inside the slice, an attacker can supply a backup archive containing a null entry in the volume_snapshots array. This causes a nil-pointer dereference during custom volume import and terminates t...

Incus is a system container and virtual machine manager. In versions before 7.0.0, missing validation logic in the storage bucket import logic allows an authenticated user with access to the storage bucket feature to cause the Incus daemon to crash. The vulnerability is present in the backup metadata handling logic, where the daemon processes the index.yaml file from an imported archive and accesses members of the parsed backup configuration without first verifying that the configuration object was initialized. A malicious or malformed index.yaml that omits the config block causes a nil-pointer dereference during bucket import operations and terminates the daemon. Repeated use of this issue can be used to keep Incus offline, causing a denial of service. This issue is fixed in version 7.0.0.

phpseclib is a PHP secure communications library. Starting in 0.1.1 and prior to 3.0.51, 2.0.53, and 1.0.28, phpseclib\Net\SSH2::get_binary_packet() uses PHP's != operator to compare a received SSH packet HMAC against the locally computed HMAC. != on equal-length binary strings in PHP uses memcmp(), which short-circuits on the first differing byte. This is a real variable-time comparison (CWE-208), proven by scaling benchmarks. This vulnerability is fixed in 3.0.51, 2.0.53, and 1.0.28.

Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memory consumption, leading to denial of service (OOM crash or severe performance degradation). If users are unable to immediately upgrade, they should only open specific image formats, excluding FITS, as a workaround.

ImageMagick is free and open-source software used for editing and manipulating digital images. In versions below 7.1.2-19, the JXL encoder has an heap write overflow when a user specifies that the image should be encoded as 16 bit floats. This issue has been fixed in version 7.1.2-19.

Prometheus is an open-source monitoring system and time series database. Versions 3.0 through 3.5.1 and 3.6.0 through 3.11.1 have stored cross-site scripting vulnerabilities in multiple components of the Prometheus web UI where metric names and label values are injected into innerHTML without escaping. In both the Mantine UI and old React UI, chart tooltips on the Graph page render metric names containing HTML/JavaScript without sanitization. In the old React UI, the Metric Explorer fuzzy search results use dangerouslySetInnerHTML without escaping, and heatmap cell tooltips interpolate le label values without sanitization. With Prometheus v3.x defaulting to UTF-8 metric and label name validation, characters like <, >, and " are now valid in metric names and labels. An attacker who can inject metrics via a compromised scrape target, remote write, or OTLP receiver endpoint can execute arbitrary JavaScript in the browser of any Prometheus user who views the metric in the Graph UI, pote...

Composer is a dependency manager for PHP. Versions 1.0 through 2.2.26 and 2.3 through 2.9.5 contain a command injection vulnerability in the Perforce::generateP4Command() method, which constructs shell commands by interpolating user-supplied Perforce connection parameters (port, user, client) without proper escaping. An attacker can inject arbitrary commands through these values in a malicious composer.json declaring a Perforce VCS repository, leading to command execution in the context of the user running Composer, even if Perforce is not installed. VCS repositories are only loaded from the root composer.json or the composer config directory, so this cannot be exploited through composer.json files of packages installed as dependencies. Users are at risk if they run Composer commands on untrusted projects with attacker-supplied composer.json files. This issue has been fixed in Composer 2.2.27 (2.2 LTS) and 2.9.6 (mainline).

Axios is a promise based HTTP client for the browser and Node.js. Versions prior to 1.15.0 and 0.3.1 are vulnerable to a specific gadget-style attack chain in which prototype pollution in a third-party dependency may be leveraged to inject unsanitized header values into outbound requests. This vulnerability is fixed in 1.15.0 and 0.3.1.

In Jupyter Notebook versions 7.0.0 through 7.5.5, JupyterLab versions 4.5.6 and earlier, and the corresponding @jupyter-notebook/help-extension and @jupyterlab/help-extension packages before 7.5.6 and 4.5.7, a stored cross-site scripting issue in the help command linker can be chained with attacker-controlled notebook content to steal authentication tokens with a single click. An attacker can craft a malicious notebook file containing elements that appear indistinguishable from legitimate controls and trigger execution when a user interacts with them. Successful exploitation allows theft of the user's authentication token and complete takeover of the Jupyter session through the REST API, including reading files, creating or modifying files, accessing kernels to execute arbitrary code, and creating terminals for shell access. This issue has been fixed in Notebook 7.5.6, JupyterLab 4.5.7, @jupyter-notebook/help-extension 7.5.6, and @jupyterlab/help-extension 4.5.7. As a workaround, di...

ngtcp2 is a C implementation of the IETF QUIC protocol. In versions prior to 1.22.1, ngtcp2_qlog_parameters_set_transport_params() serializes peer transport parameters into a fixed 1024-byte stack buffer without bounds checking. When qlog is enabled, a remote peer can send sufficiently large transport parameters during the QUIC handshake to cause writes beyond the buffer boundary, resulting in a stack buffer overflow. This affects deployments that enable the qlog callback and process untrusted peer transport parameters. This issue has been fixed in version 1.22.1. If developers are unable to immediately upgrade, they can disable the qlog on client.

A security vulnerability has been detected in GPAC 26.03-DEV. Affected by this vulnerability is the function svgin_process of the file src/filters/load_svg.c of the component SVG Parser. The manipulation leads to out-of-bounds write. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. The identifier of the patch is 7618d7206cdeb3c28961dc97ab0ecabaff0c8af2. It is suggested to install a patch to address this issue.